Vacuum press for veneering VPS

Prasa próżniowa membranowa z serii VPS-300


Membrane vacuum press from the VPS series, designed for 3D veneering as well as layered bending on a template. Equipped with a heating system that allows you to shorten the gluing time and increase production efficiency by up to 70%. VPS vacuum presses are designed for small and large production plants.

Area of aplication

  • Veneering straight and curved elements with natural veneer (doors, frames, chairs, tables, furniture, coffins, door frame bands)
  • Veneering elements with HPL laminates in 2D format (kitchen tops, window sills)
  • Ironing of structural surfaces (stone veneer, decorative mats)
  • Production of elements using the sandwich-sandwich method (columns, semicircles, flat surfaces)
  • Wrapping the cockpit elements in the car with leather (dashboard, gear stick, etc.)


  • Solid welded structure with detachable legs, powder coated
  • Equipped with an electronic vacuum control system, it allows for automatic pump operation, and together with a buffer tank, it allows you to save electricity by turning off the pump after reaching the set vacuum value.
  • Electronic heating system with a PID controller with an air mixer in the dome allows you to heat the press up to 80oC
  • Built-in rubber membrane with very high flexibility (elongation 600%)
  • Press table top made of HPL board
  • Built-in vacuum pump -0.9 bar (9000) kg / m2
  • Built-in 25 liter buffer tank
  • The upper heating dome is made of aluminum, insulated with mineral wool

Technical data

Dimensions of the working table (length x width), mm: 2850 х 1150 2850 х 1350
Maximum height of the workpiece in the center of the table 400mm 400mm
Rubber membrane 600% temperature max: 130oC 130oC
Silicone membrane 800% temperature max.: 230oC 230oC
Heater power, kW: 4kW + hot air 6kW +hot air
Pump power, kW: 0,75 0,75
Vacuum pump performance, m3/h: 25 25
Working vacuum, kg/сm2 (bar): – 0,85 do -0,90 – 0,85 do -0,90
Cover level: IP53 IP53
Noise level, Db: < 70 < 70
Voltage, V: 3P 400 50Hz 3P 400 50Hz
lenght (mm)
width (mm)
hight (mm)
Weight, kg: 550 650


We provide a 1-year warranty on the device!

Configuration according to customer's wishes

Optionally, the machine can be configured according to the customer’s wishes, e.g .:

  • enlarged dimensions of the machine
  • workpiece height
  • aluminum worktop
  • 2 or 3 mm silicone membrane
  • quick change frame with a membrane system (additional frame with a membrane for higher elements. The membrane is then mounted loosely or the additional frame can be with a thinner membrane. The time of replacing such a frame is 60 seconds)
  • increased maximum operating temperature of the dome
  • version of the machine without a heating dome
  • increased capacity of the vacuum pump
  • an overview window of the pressing process with lighting installed in the dome

Product photos