Vacuum press VPS Special Big-size
Description
Vacuum press with pneumatically lifted membrane designed for 2D veneering, layered bending on a template as well as thermoplastic molding. Equipped with a heating system that allows you to shorten the gluing time and increase production efficiency. VPS vacuum presses are designed for small and large production plants.
Area of aplication
- Covering simple and shaped elements with natural veneer (doors, frames, chairs, tables, furniture, coffins)
- Veneering elements with HPL laminates in 2D format (kitchen worktops, window sills)
- Ironing of structural surfaces (stone veneer, decorative mats)
- Production of elements using the sandwich-sandwich method (columns, semicircles, flat surfaces)
- Wrapping the cockpit elements in the car with leather (dashboard, gear stick, etc.)
- Forming mineral-acrylic Solid Surface plates as Corian, Staron, Hi-Macs, etc.
- Molding of thermoplastic plastics
Construction
- Solid welded structure, powder coated
- Equipped with an electronic vacuum control system that allows the pump to operate automatically, and together with a buffer tank, it allows you to save electricity by turning off the pump after reaching the set vacuum value.
- Electronic heating system with a PID controller with an air mixer in the dome allows you to heat the press up to 80oC
- Built-in rubber membrane or optionally a silicone membrane
- Equipped with four pneumatic actuators for lifting the diaphragm with a heating dome
- Press table top made of HPL board, optional aluminum top
- Built-in vacuum pump -0,9 bar (9000) kg / m2
- Built-in buffer tank from 25 to 100 liters
- Upper heating dome made of aluminum, insulated with mineral wool – optional
Technical data
Table dimensions (length x width), mm: | 4000 х 1850 | |
Dimensions of the working area (length x width),mm: | 3800 х 1650 | |
Maximum height of the workpiece with a width of 500mm in the center of the table | 700mm | |
Rubber membrane max temperature: | 90oC | |
Silicone membrane max temperature: | 230oC | |
Heaters power, kW: | 2 x 2 lub 3 x 2 + termoobieg | |
Pump power kW: | 1,25 | |
Vacuum pump capacity, m3 / h: | 40 | |
Working vacuum, kg/сm2 (bar): | – 0,85 do -0,90 | |
Cover level: | IP53 | |
Noise level, Db: | < 70 | |
Voltage, V: | 3P 400 50Hz | |
Overall dimensions, mm lenght width hight (max) |
4500 |
|
Weight, kg: | 1600 |
Warranty
We provide 1-year warranty on the device!
Configuration according to customer's wishes
Optionally, the machine can be configured according to the customer’s wishes, e.g .:
- aluminum worktop or version with a heated worktop,
- increased maximum operating temperature of the dome,
- installed system for quick cooling of thermoplastic elements through fans in the dome or a version of the machine without a heating dome for unconstrained cooling,
- increased capacity of the vacuum pump,
- controller for automatic operation,
- an overview window of the pressing process with lighting installed in the dome,