Vacuum press
VPS Special Big-size

Prasa próżniowa do fornirowania i gięcia wysokich elementów


Vacuum press with pneumatically lifted membrane designed for 2D veneering, layered bending on a template as well as thermoplastic molding. Equipped with a heating system that allows you to shorten the gluing time and increase production efficiency. VPS vacuum presses are designed for small and large production plants.

Area of aplication

  • Covering simple and shaped elements with natural veneer (doors, frames, chairs, tables, furniture, coffins)
  • Veneering elements with HPL laminates in 2D format (kitchen worktops, window sills)
  • Ironing of structural surfaces (stone veneer, decorative mats)
  • Production of elements using the sandwich-sandwich method (columns, semicircles, flat surfaces)
  • Wrapping the cockpit elements in the car with leather (dashboard, gear stick, etc.)
  • Forming mineral-acrylic Solid Surface plates as Corian, Staron, Hi-Macs, etc.
  • Molding of thermoplastic plastics


  • Solid welded structure, powder coated
  • Equipped with an electronic vacuum control system that allows the pump to operate automatically, and together with a buffer tank, it allows you to save electricity by turning off the pump after reaching the set vacuum value.
  • Electronic heating system with a PID controller with an air mixer in the dome allows you to heat the press up to 80oC
  • Built-in rubber membrane or optionally a silicone membrane
  • Equipped with four pneumatic actuators for lifting the diaphragm with a heating dome
  • Press table top made of HPL board, optional aluminum top
  • Built-in vacuum pump -0,9 bar (9000) kg / m2
  • Built-in buffer tank from 25 to 100 liters
  • Upper heating dome made of aluminum, insulated with mineral wool – optional

Technical data

Table dimensions (length x width), mm: 4000 х 1850
Dimensions of the working area (length x width),mm: 3800 х 1650
Maximum height of the workpiece with a width of 500mm in the center of the table 700mm
Rubber membrane max temperature: 90oC
Silicone membrane max temperature: 230oC
Heaters power, kW: 2 x 2 lub 3 x 2 + termoobieg
Pump power kW: 1,25
Vacuum pump capacity, m3 / h: 40
Working vacuum, kg/сm2 (bar): – 0,85 do -0,90
Cover level: IP53
Noise level, Db: < 70
Voltage, V: 3P 400 50Hz
Overall dimensions, mm
hight (max)


2300 (2700)

Weight, kg: 1600


We provide 1-year warranty on the device!

Configuration according to customer's wishes

Optionally, the machine can be configured according to the customer’s wishes, e.g .:

  • aluminum worktop or version with a heated worktop,
  • increased maximum operating temperature of the dome,
  • installed system for quick cooling of thermoplastic elements through fans in the dome or a version of the machine without a heating dome for unconstrained cooling,
  • increased capacity of the vacuum pump,
  • controller for automatic operation,
  • an overview window of the pressing process with lighting installed in the dome,

Product photos