Consumables for vacuum presses
These are service components used in our devices. Here you can find seals, gas springs, locks, valves, actuators, heaters and other useful elements used in our vacuum presses. If you have not found what you are looking for, please contact us!
Graphite vanes for Becker dry pumps
Graphite vanes
Graphite vanes for Becker dry vacuum pumps
Complete set for pumps:
-VT 4.25
-VT. 4.40
Insulated nozzles for sublimation
Vacuum nozzles for sublimation
Insulated nozzle for sublimation of wood pattern and graphic on aluminum elements and profiles.
Bottom 1/2 inch threaded connection.
Locks and clamps
TT lock
TT locks with an adjustable head on the thread. Used as membrane frame closers. They ensure tightness on the vacuum table.
Up to 90 kg
U lock
Locks with a U-shaped handle with an adjustable head on the thread. Used as membrane frame closers. They ensure tightness on the vacuum table.
Up to 400 kg
Horizontal toggle clamps
Horizontal clamps used for adjustable membrane assembly in Special presses.
Up to 90 kg
Rubber seals
P-type gasket Φ 8 mm
A rubber gasket used to seal the diaphragm frame. Soft gasket used in most of our devices. Manual pressure.
P-type gasket Φ 6 mm
A rubber gasket used to seal the diaphragm frame. A hard seal used in our Special model press. Mechanical pressure.
Gas springs
Gas springs
Gas spring used to lift the dome and diaphragm frame. Equipped with a static brake. We have the following types:
| Strenght (N) | Spacing (mm) | Total length (mm) |
| 150 | 280 | 300 |
| 280 | 565 | 585 |
| 315 | 280 | 300 |
| 530 | 575 | 595 |
| 590 | 570 | 590 |
| 650 | 565 | 585 |
| 660 | 570 | 590 |
| 750 | 570 | 590 |
| 810 | 550 | 570 |
| 830 | 570 | 590 |
Heaters
Hot-air heaters
A convection heater used in our vacuum presses. Made of a tubular element.
Power: 2000 W. Voltage: 230V – 50Hz. Internal diameter: 180mm
Infrared heater
Quartz infrared (IR) heater with carbon fiber. Used in our thermoforming machines and other devices that require fast and even heating.
Power: 600 W.
Length: 590 mm
Diameter: 12mm
Fans
hot-air fans
The fan used in our vacuum presses to evenly distribute the temperature in the heating chamber.
Power: 30 W
Voltage: 230 V- 50 Hz
Revolutions: 2300 / min
Fan diameter: 145 mm
Valves
Quick coupler valve
The valve is equipped with a quick coupling and a gasket for mounting in a vacuum bag. Made of HPL material, with milled venting channels on the bottom
Filters
Vacuum pumps filters
Paper vacuum pump filter, used in dry and oil pumps. We have filters for Busch and Becker pumps
Oil separator
Cloth vacuum pump oil separator, used in oil pumps. We have replacements for Becker and Busch vacuum pumps.
String filter
The string air filter is used as pre-protection for the vacuum pump. It catches impurities of the size of 10 microns. The use of this filter extends the life of the vacuum pump.