Consumables for vacuum presses

These are service components used in our devices. Here you can find seals, gas springs, locks, valves, actuators, heaters and other useful elements used in our vacuum presses. If you have not found what you are looking for, please contact us!

Graphite vanes for Becker dry pumps

Graphite vanes

Graphite vanes for Becker dry vacuum pumps
Complete set for pumps:
-VT 4.25
-VT. 4.40

Locks and clamps

TT lock

TT locks with an adjustable head on the thread. Used as membrane frame closers. They ensure tightness on the vacuum table.

Up to 90 kg

U lock

Locks with a U-shaped handle with an adjustable head on the thread. Used as membrane frame closers. They ensure tightness on the vacuum table.

Up to 400 kg

Horizontal toggle clamps

Horizontal clamps used for adjustable membrane assembly in Special presses.

Up to 90 kg

Rubber seals

P-type gasket Φ 8 mm

A rubber gasket used to seal the diaphragm frame. Soft gasket used in most of our devices. Manual pressure.

P-type gasket Φ 6 mm

A rubber gasket used to seal the diaphragm frame. A hard seal used in our Special model press. Mechanical pressure.

Gas springs

Gas springs

Gas spring used to lift the dome and diaphragm frame. Equipped with a static brake. We have the following types:

Strenght (N) Spacing (mm) Total length (mm)
150 280 300
280 565 585
315 280 300
530 575 595
590 570 590
650 565 585
660 570 590
750 570 590
810 550 570
830 570 590

Heaters

Hot-air heaters

A convection heater used in our vacuum presses. Made of a tubular element.

Power: 2000 W. Voltage: 230V – 50Hz. Internal diameter: 180mm

Infrared heater

Quartz infrared (IR) heater with carbon fiber. Used in our thermoforming machines and other devices that require fast and even heating.

Power: 600 W.
Length: 590 mm
Diameter: 12mm

Fans

hot-air fans

The fan used in our vacuum presses to evenly distribute the temperature in the heating chamber.

Power: 30 W
Voltage: 230 V- 50 Hz
Revolutions: 2300 / min
Fan diameter: 145 mm

Valves

Quick coupler valve

The valve is equipped with a quick coupling and a gasket for mounting in a vacuum bag. Made of HPL material, with milled venting channels on the bottom

Filters

Vacuum pumps filters

Paper vacuum pump filter, used in dry and oil pumps. We have filters for Busch and Becker pumps

Oil separator

Cloth vacuum pump oil separator, used in oil pumps. We have replacements for Becker and Busch vacuum pumps.

String filter

The string air filter is used as pre-protection for the vacuum pump. It catches impurities of the size of 10 microns. The use of this filter extends the life of the vacuum pump.